HP Scitex FB7500 Advanced Printer Guide Rev. B - Page 101
Printing a Job, Loading/Unloading System Setup, Adding a New Job
View all HP Scitex FB7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
To load the substrate manually: 1 In the FB7500 main window, click Print Job; the printing table moves to the left. 2 Press the pedal; the system deactivates the vacuum to the printing table and raises the registration pins. 3 Place the substrate on the printing table and attach it to the registration pins (see Figure 4-5 on page 91). 4 Release the pedal; the system activates the vacuum to the printing table and lowers the registration pins. A message appears, asking you to confirm that the substrate is loaded properly. Click Yes to start the printing process. Printing a Job 1 Set the loading/unloading system parameters for the selected substrate as described in Loading/Unloading System Setup on page 86. 2 Add a new job as described in Adding a New Job on page 49; the job appears in the Jobs List with the Not Ready status. 3 Select the job and click the Prepare Job Offline icon on the toolbar; the job status changes to Ready. 92 HP Scitex FB7500 Advanced Printer Guide