HP Scitex FB7500 Advanced Printer Guide Rev. B - Page 93
System Startup, Clean the quartz filters in the UV lamp housing.
View all HP Scitex FB7500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
System Startup The HP Scitex FB7500 system startup procedure involves the following steps: 1 Visually check for: • Ink leakage • Loose connections • Overheating components • Obstacles on the printing table 2 Perform general cleaning, as follows: • Clean the printer and the production area. • Remove obstacles or foreign objects placed close to the printer. • Check that the maintenance waste bath is clean. • Clean the quartz filters in the UV lamp housing. • Clean the printing table. 3 Prior to the system startup, check the following: • Check the ink level in the main ink tanks. • Make sure the air pressure in the main air pressure regulator is 6 bars. 84 HP Scitex FB7500 Advanced Printer Guide
84
HP Scitex FB7500 Advanced Printer Guide
System Startup
The HP Scitex FB7500 system startup procedure involves the
following steps:
1
Visually check for:
•
Ink leakage
•
Loose connections
•
Overheating components
•
Obstacles on the printing table
2
Perform general cleaning, as follows:
•
Clean the printer and the production area.
•
Remove obstacles or foreign objects placed close to the
printer.
•
Check that the maintenance waste bath is clean.
•
Clean the quartz filters in the UV lamp housing.
•
Clean the printing table.
3
Prior to the system startup, check the following:
•
Check the ink level in the main ink tanks.
•
Make sure the air pressure in the main air pressure regulator
is
6 bars.