HP Slate 8 Pro 7600us HP Slate8 Pro Maintenance and Service Guide - Page 24
Battery, WARNING
View all HP Slate 8 Pro 7600us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
4. Remove the I/O board cable (3). Reverse this procedure to install the I/O board cable. Battery Description Battery, 2-cell, 21-WHr, 2.84-AHr, LI (includes cable) Spare part number 743821-001 Before removing the battery, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 13). 5. Remove the display panel cable (see Display panel cable on page 14). 6. Remove the I/O board cable (see I/O board cable on page 16). WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a replacement battery provided by HP, or a compatible battery purchased from HP. 18 Chapter 5 Removal and replacement procedures