HP Slate 8 Pro 7600us HP Slate8 Pro Maintenance and Service Guide - Page 26

I/O board

Get HP Slate 8 Pro 7600us PDF manuals and user guides View all HP Slate 8 Pro 7600us manuals
Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

I/O board Description I/O board NOTE: The I/O board spare part kit does not include the I/O board cable. The I/O board cable is available using spare part number 743830-001. Spare part number 743829-001 Before removing the I/O board, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 13). Remove the I/O board: 1. Disconnect the battery cable from the system board. 2. Release the ZIF connector (1) to which the I/O board cable is attached, and then disconnect the I/O board cable from the I/O board. 3. Disconnect the speaker cables (2) from the I/O board. 4. Remove the two Phillips PM1.5×4.0 screws (3) that secure the I/O board to the display panel assembly. 20 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
I/O board
Description
Spare part number
I/O board
NOTE:
The I/O board spare part kit does not include the I/O board cable. The I/O board
cable is available using spare part number 743830-001.
743829-001
Before removing the I/O board, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
13
).
Remove the I/O board:
1.
Disconnect the battery cable from the system board.
2.
Release the ZIF connector
(1)
to which the I/O board cable is attached, and then disconnect the
I/O board cable from the I/O board.
3.
Disconnect the speaker cables
(2)
from the I/O board.
4.
Remove the two Phillips PM1.5×4.0 screws
(3)
that secure the I/O board to the display
panel assembly.
20
Chapter 5
Removal and replacement procedures