HP Slate 8 Pro 7600us HP Slate8 Pro Maintenance and Service Guide - Page 25
that covers the battery retention screw., Remove the warranty tag
View all HP Slate 8 Pro 7600us manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of information. To prevent loss of information, save your work or shut down the tablet through Windows before removing the battery. Remove the battery: 1. Disconnect the battery cable (1) from the system board. 2. Remove the warranty tag (2) that covers the battery retention screw. 3. Remove the two Phillips PM1.5×3.0 screws (3) and the six Phillips PM1.5×2.5 screws (4) that secure the battery to the display panel assembly. 4. Remove the battery (5). Reverse this procedure to install the battery. Battery 19
CAUTION:
Removing a battery that is the sole power source for the tablet can cause loss of
information. To prevent loss of information, save your work or shut down the tablet through Windows
before removing the battery.
Remove the battery:
1.
Disconnect the battery cable
(1)
from the system board.
2.
Remove the warranty tag
(2)
that covers the battery retention screw.
3.
Remove the two Phillips PM1.5×3.0 screws
(3)
and the six Phillips PM1.5×2.5 screws
(4)
that
secure the battery to the display panel assembly.
4.
Remove the battery
(5)
.
Reverse this procedure to install the battery.
Battery
19