HP Slate 8 Pro 7600us HP Slate8 Pro Maintenance and Service Guide - Page 29

WLAN antenna

Page 29 highlights

Reverse this procedure to install the speakers. WLAN antenna Description WLAN main antenna (includes cable and transceiver) WLAN auxilliary antenna (includes cable and transceiver) Spare part number 746230-001 746231-001 Before removing the WLAN antenna, follow these steps: 1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and then shut it down through the operating system. 2. Disconnect the power from the tablet by unplugging the power cord from the tablet. 3. Disconnect all external devices from the tablet. 4. Remove the back cover (see Back cover on page 13). Remove the WLAN antenna: 1. Disconnect the battery cable from the system board. NOTE: Steps 2 through 5 contain WLAN main antenna removal information. See steps 6 through 9 for WLAN auxilliary antenna removal information. 2. Disconnect the WLAN main antenna cable (1) from the main terminal on the system board. 3. Release the WLAN main antenna cable from the routing clips (2) and channel built into the display panel assembly. WLAN antenna 23

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

Reverse this procedure to install the speakers.
WLAN antenna
Description
Spare part number
WLAN main antenna (includes cable and transceiver)
746230-001
WLAN auxilliary antenna (includes cable and transceiver)
746231-001
Before removing the WLAN antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,
and then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
Back cover
on page
13
).
Remove the WLAN antenna:
1.
Disconnect the battery cable from the system board.
NOTE:
Steps 2 through 5 contain WLAN main antenna removal information. See steps 6
through 9 for WLAN auxilliary antenna removal information.
2.
Disconnect the WLAN main antenna cable
(1)
from the main terminal on the system board.
3.
Release the WLAN main antenna cable from the routing clips
(2)
and channel built into the
display panel assembly.
WLAN antenna
23