HP Slate 8 Pro 7600us HP Slate8 Pro Maintenance and Service Guide - Page 30

system board., Disconnect the WLAN auxilliary antenna cable

Page 30 highlights

4. Detach the WLAN main antenna transceiver (3) from the display panel assembly. (The WLAN main antenna transceiver is attached to the display panel assembly with double-sided adhesive.) 5. Remove the WLAN main antenna transceiver and cable. NOTE: Steps 6 through 9 contain WLAN auxilliary antenna removal information. See steps 2 through 5 for WLAN main antenna removal information. 6. Disconnect the WLAN auxilliary antenna cable (1) from the auxilliary terminal on the system board. 7. Release the WLAN auxilliary antenna cable from the routing clips (2) and channel built into the display panel assembly. 24 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53

4.
Detach the WLAN main antenna transceiver
(3)
from the display panel assembly. (The WLAN
main antenna transceiver is attached to the display panel assembly with double-sided adhesive.)
5.
Remove the WLAN main antenna transceiver and cable.
NOTE:
Steps 6 through 9 contain WLAN auxilliary antenna removal information. See steps 2
through 5 for WLAN main antenna removal information.
6.
Disconnect the WLAN auxilliary antenna cable
(1)
from the auxilliary terminal on the
system board.
7.
Release the WLAN auxilliary antenna cable from the routing clips
(2)
and channel built into the
display panel assembly.
24
Chapter 5
Removal and replacement procedures