HP Spectre Pro x360 Maintenance and Service Guide - Page 31

Fan, Remove the bottom cover see

Get HP Spectre Pro x360 PDF manuals and user guides View all HP Spectre Pro x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

Fan Description Fan (includes cable) Spare part number 828818-001 NOTE: To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are affected by high external temperatures, system power consumption, power management/battery conservation configurations, battery fast charging, and software requirements. Exhaust air is displaced through the ventilation grill located on the left side of the computer. Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 19). 5. Disconnect the battery cable from the system board (see Battery on page 21). Remove the fan: 1. Disconnect the fan cable (1) from the system board. 2. Remove the two Phillips PM2.0×4.0 screws (2) that secure the fan to the top cover. 3. Remove the fan (3). Reverse this procedure to install the fan. Fan 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Fan
Description
Spare part number
Fan (includes cable)
828818-001
NOTE:
To properly ventilate the computer, allow at least 7.6 cm (3 in) of clearance on the left side
of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
sensor and is designed to turn on automatically when high temperature conditions exist. These conditions are
affected
by high external temperatures, system power consumption, power management/battery
conservation
configurations,
battery fast charging, and software requirements. Exhaust air is displaced
through the ventilation grill located on the left side of the computer.
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
19
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
21
).
Remove the fan:
1.
Disconnect the fan cable
(1)
from the system board.
2.
Remove the two Phillips PM2.0×4.0 screws
(2)
that secure the fan to the top cover.
3.
Remove the fan
(3)
.
Reverse this procedure to install the fan.
Fan
25