HP Spectre Pro x360 Maintenance and Service Guide - Page 43
forward until the display hinges, Remove the display assembly
View all HP Spectre Pro x360 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Release the display panel cable from the retention post (2) built into the top cover. 4. Remove the four Phillips PM2.5×4.1 screws (1) that secure the display assembly to the top cover. 5. Slide the display assembly (2) forward until the display hinges (3) clear the top cover. 6. Remove the display assembly (4). Reverse this procedure to install the display assembly. Display assembly 37
3.
Release the display panel cable from the retention post
(2)
built into the top cover.
4.
Remove the four Phillips PM2.5×4.1 screws
(1)
that secure the display assembly to the top cover.
5.
Slide the display assembly
(2)
forward until the display hinges
(3)
clear the top cover.
6.
Remove the display assembly
(4)
.
Reverse this procedure to install the display assembly.
Display assembly
37