HP Spectre Pro x360 Maintenance and Service Guide - Page 42

Display assembly

Get HP Spectre Pro x360 PDF manuals and user guides View all HP Spectre Pro x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 42 highlights

3. Remove the keyboard (2). Reverse this procedure to install the keyboard. Display assembly Description Display assembly (13.3-in, QHD, OLED, BrightView (2560×1440), UWVA, 2.55-mm in ash silver finish, ultra wide aspect ratio, TouchScreen (includes display panel cable, microphones, hinges, webcam, and wireless antenna cables and transceivers) Spare part number 848809-001 Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 19), and then remove the following components: a. Remove the battery (see Battery on page 21). b. Remove the fan (see Fan on page 25). c. Remove the system board (see System board on page 30). Remove the display assembly: 1. Open the computer to the interactive position, as shown in the following illustrations. 2. Release the WLAN antenna cables from the retention post (1) built into the top cover. 36 Chapter 5 Removal and replacement procedures

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
3.
Remove the keyboard
(2)
.
Reverse this procedure to install the keyboard.
Display assembly
Description
Spare part number
Display assembly (13.3-in, QHD, OLED, BrightView (2560×1440), UWVA, 2.55-mm in ash silver
finish,
ultra wide aspect ratio, TouchScreen (includes display panel cable, microphones, hinges, webcam,
and wireless antenna cables and transceivers)
848809-001
Before removing the display assembly, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
19
), and then remove the following components:
a.
Remove the battery (see
Battery
on page
21
).
b.
Remove the fan (see
Fan
on page
25
).
c.
Remove the system board (see
System board
on page
30
).
Remove the display assembly:
1.
Open the computer to the interactive position, as shown in the following illustrations.
2.
Release the WLAN antenna cables from the retention post
(1)
built into the top cover.
36
Chapter 5
Removal and replacement procedures