HP Spectre Pro x360 Maintenance and Service Guide - Page 35

Card reader board, to which the card reader board cable is attached, and then

Get HP Spectre Pro x360 PDF manuals and user guides View all HP Spectre Pro x360 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 35 highlights

Card reader board Description Card reader board (includes cable) Spare part number 828821-001 Before removing the card reader board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 19). 5. Remove the battery (see Battery on page 21). 6. Remove the speakers (see Speakers on page 26). Remove the card reader board: 1. Release the ZIF connector (1) to which the card reader board cable is attached, and then disconnect the card reader board cable from the system board. 2. Remove the Phillips PM2.0×2.7 screws (2) that secure the card reader board to the top cover. 3. Remove the card reader board (3) and cable from the top cover. 4. Remove the card reader board. Reverse this procedure to install the card reader board. Card reader board 29

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
Card reader board
Description
Spare part number
Card reader board (includes cable)
828821-001
Before removing the card reader board, follow these steps:
1.
Turn
off
the computer. If you are unsure whether the computer is
off
or in Hibernation,
turn the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
Bottom cover
on page
19
).
5.
Remove the battery (see
Battery
on page
21
).
6.
Remove the speakers (see
Speakers
on page
26
).
Remove the card reader board:
1.
Release the ZIF connector
(1)
to which the card reader board cable is attached, and then
disconnect the card reader board cable from the system board.
2.
Remove the Phillips PM2.0×2.7 screws
(2)
that secure the card reader board to the top cover.
3.
Remove the card reader board
(3)
and cable from the top cover.
4.
Remove the card reader board.
Reverse this procedure to install the card reader board.
Card reader board
29