HP Spectre Ultrabook 14-3200 HP Spectre Ultrabook PC Maintenance and Service G - Page 45
Card Reader board cable, from the system board,
View all HP Spectre Ultrabook 14-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Card Reader board cable NOTE: The Card Reader board cable is included in the Cable Kit, spare part number 672006-001. Before removing the Card Reader board cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 33). Remove the Card Reader board cable: ▲ Disconnect both ends of the Card Reader board cable (1) and (2) from the system board, and then release the cable (3) from the clips and channel built into the base enclosure. Reverse this procedure to install the Card Reader board cable. Component replacement procedures 37