HP Spectre Ultrabook 14-3200 HP Spectre Ultrabook PC Maintenance and Service G - Page 57
RTC battery, Remove the battery see
View all HP Spectre Ultrabook 14-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3. Remove the two Phillips PM2.0×3.8 screws (1) that secure the speakers to the base enclosure. 4. Remove the speakers (2). Reverse this procedure to install the speakers. RTC battery Description RTC battery (double-sided tape and cable) Spare part number 672013-001 Before removing the RTC battery, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 33), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 35) b. Card Reader board cable (see Card Reader board cable on page 37) c. Top cover (see Top cover on page 40) d. Speakers (see Speakers on page 48) Component replacement procedures 49