HP Spectre Ultrabook 14-3200 HP Spectre Ultrabook PC Maintenance and Service G - Page 55

Remove the Phillips PM2.0×3.6 screw

Get HP Spectre Ultrabook 14-3200 PDF manuals and user guides View all HP Spectre Ultrabook 14-3200 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 33), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 35) b. Card Reader board cable (see Card Reader board cable on page 37) c. Top cover (see Top cover on page 40) Remove the power button board: 1. Turn the top cover upside down, with the front toward you. 2. Remove the Phillips PM2.0×3.6 screw (1) that secures the power button board to the top cover. 3. Remove the power button board (2) and cable. Reverse this procedure to install the power button board. Component replacement procedures 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
Battery
on page
33
), and then remove the following components:
a.
Solid-state drive connector board cable (see
Solid-state drive
on page
35
)
b.
Card Reader board cable (see
Card Reader board cable
on page
37
)
c.
Top cover (see
Top cover
on page
40
)
Remove the power button board:
1.
Turn the top cover upside down, with the front toward you.
2.
Remove the Phillips PM2.0×3.6 screw
(1)
that secures the power button board to the top cover.
3.
Remove the power button board
(2)
and cable.
Reverse this procedure to install the power button board.
Component replacement procedures
47