HP Spectre Ultrabook 14-3200 HP Spectre Ultrabook PC Maintenance and Service G - Page 73
Hinge covers, Card Reader board cable see
View all HP Spectre Ultrabook 14-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Hinge covers Description Hinge covers Spare part number 672009-001 Before removing the hinge covers, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 33), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 35) b. Card Reader board cable (see Card Reader board cable on page 37) c. Top cover (see Top cover on page 40) d. WLAN module (see WLAN module on page 53) e. Wireless audio module (see Wireless audio module on page 51) f. System board (see System board on page 57) Remove the hinge covers: 1. Remove the four Phillips PM2.0×3.8 screws (1) that secure the hinge covers to the base enclosure. Component replacement procedures 65