HP Spectre Ultrabook 14-3200 HP Spectre Ultrabook PC Maintenance and Service G - Page 76
Power connector cable
View all HP Spectre Ultrabook 14-3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
5. Remove the display assembly (2). Reverse this procedure to install the display assembly. Power connector cable Description Power connector cable Spare part number 687530-001 Before removing the power connector cable, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the battery (see Battery on page 33), and then remove the following components: a. Solid-state drive connector board cable (see Solid-state drive on page 35) b. Card Reader board cable (see Card Reader board cable on page 37) c. Top cover (see Top cover on page 40) d. WLAN module (see WLAN module on page 53) e. Wireless audio module (see Wireless audio module on page 51) 68 Chapter 4 Removal and replacement procedures