HP Sprocket 2-in-1 User Guide - Page 3

Selfie Mirror • Use the reflective surface on the front side of the Viewfinder as a self-portrait mirror. Instant Camera Flash Functions • When the device is powered on in Instant Camera Mode, the camera will automatically trigger the flash if it is necessary for the light conditions. Using the 10-second Timer Button 1. Press and release the Timer Button to toggle between turning the timer on and off. 2. Press the Shutter Release Button to begin the 10 second-countdown. A sound and white Timer LED Light will alert you the timer is enabled. The timer will automatically disable after each photo is taken. • To cancel the timer while it is counting down, press the Timer Button. • The Timer LED Light will blink slowly for seven seconds and quickly for the final three seconds before taking the photo. What if my HP Sprocket 2-in-1 isn't responding or won't connect to my mobile device? If you have trouble connecting or other issues, reset the device. Remove the Paper Cover and locate the pin-hole near the Paper Tray. Insert a straight pin into the hole to press the Reset Button until the printer turns off. Restart the device. Reset Button LED Indicator Lights Charging Indicator LED Light LED Color/State Condition Off Fully charged or not connected to a power source Red, solid Charging; printer can be used while charging Red, blinking During use, indicates a low battery before turning off. When off, user presses the power switch and the device cannot power ON because of a low battery Status Indicator LED Lights LED Color/State Condition Off The printer is OFF White, solid The printer is ON White, fast blinking The printer is booting up; LEDs will turn solid white when ON White, slow blinking Processing a print job from instant camera or mobile device Red, solid Printer in error state. Wait for the light to turn white to send a print job Red, slow blinking Out of paper. Insert more paper to continue printing Micro-SD Storage LED Light LED Color/State Condition Off No Micro-SD card installed or card installed with available storage Red, solid Micro-SD storage is full. Photos cannot be saved, but can be printed Red, slow blinking Micro-SD card has space for approximately 20 more photos 2