HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 264
FCoE, Brocade FCoE10-24 blade, there are 24 configurable FCoE ports numbered
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
2 FCoE FCoE Synopsis Manages and displays FCoE configuration. fcoe --cfgshow [[slot]port] fcoe --disable [slot]port fcoe --enable [slot]port fcoe --loginshow [[slot]port] fcoe --fcmapset -vlan vid fcmapid fcoe --fcmapunset -vlan vid fcoe --fipcfg -advintvl intvl fcoe --fipcfgshow fcoe --resetlogin [-teport slot/port | -device wwn ] fcoe --help Description Use this command to configure and display the status of FCoE ports, FCoE Initialization Protocol (FIP), and FCMAP settings. Unlike regular FC ports, FCoE ports are embedded interfaces that are not directly associated with an external physical port on the switch. Although show commands such as switchShow display FCoE ports as "ports," configuration of these ports through the regular FC CLI is disabled. Only the FCoE CLI commands can be used. Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands. slot Specifies the slot number on bladed systems, followed by a slash (/). port Specifies the port number. There are 24 configurable embedded FCoE ports on the Brocade 8000 switch, and the valid range for port is 8 to 31. On the Brocade FCoE10-24 blade, there are 24 configurable FCoE ports numbered 0-23. Use switchShow for a list of valid FCoE ports. --help --cfgshow Displays the command usage. Displays the configuration of a specified embedded FCoE port. If a port is not specified, the command displays all port configurations. --disable Disables the specified FCoE port. --enable Enables the specified FCoE port. --loginshow Displays information about the devices logged into the specified FCoE port. --fcmapset -vlan vid fcmapid Configures the FCMAP values for Fabric Provided MAC Addresses (FPMA) for the specified VLANs. Specifies the VLAN for which to set the FCMAP. Specifies the FCMAP to be set. 234 Fabric OS Command Reference 53-1001337-01