HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 590
Operands, switchShow, F_Port Top Talker commands, delete, Examples, To delete the F_Port Top Talker
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 590 highlights
2 perfTTmon Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port on which to install Top Talkers, followed by a slash (/). portnumber Specifies the number of the port on which the Top Talker is to be installed, relative to its slot for bladed systems. Use switchShow for a list of valid ports. F_Port Top Talker commands: --add Installs the Top Talker monitor on a specified F_Port. egress | ingress Used with the --add option to specify the direction in which the traffic is monitored as incoming or outgoing. This operand is required. --show Displays the top talking flows on a specified port. number of top talking flows Specifies "n" top talking flows. Valid values are between 1 and 32. If a value greater than 32 is entered, Top Talker displays counters for only 32 flows and a warning message. This operand is optional; if omitted, the command displays the top 8 flows. wwn | pid Specifies the output display as either WWN or PID format. This operand is optional. If omitted, the command displays in WWN format. --delete Deletes an existing Top Talker monitor on a specified F_Port. Fabric Mode Top Talker commands: --add fabricmode Installs the Top Talker monitor on all switches in the fabric. When a new switch joins the fabric, this command must be run again on the switch. The TT configuration information is not propagated automatically to the new switch. --show Displays the Top Talking flows on the switch for a given domain ID. dom dom_id Specifies the domain ID for the flow display. number of top talking flows Specifies "n" Top Talking flows. Valid values are between 1 and 32. If a value greater than 32 is entered, Top Talker displays counters for only 32 flows and a warning message. This operand is optional; if omitted, the command displays the top 8 flows. wwn | pid Specifies display as either WWN or PID format. This operand is optional; if omitted, the command displays in WWN format. --delete fabricmode Deletes the Fabric Mode Top Talker. Examples To add an F_Port Top Talker to blade 1 port 2 (which should be an F_Port): Switch:admin> perfttmon --add ingress 1/2 To delete the F_Port Top Talker: switch:admin> perfttmon --del 1/2 560 Fabric OS Command Reference 53-1001337-01