HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 477
Using Fabric OS Commands, Command, Availability, Fabric OS Administrator's Guide
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 477 highlights
lfCfg 2 When lfCfg is issued within a logical switch context, only the configuration regarding that switch and the fabrics reachable from that switch is displayed. When the command is issued in a chassis context the information for all chassis in the base fabric reachable from the current chassis is displayed. Executing chassis-level commands requires chassis permissions. Refer to the userConfig command for information on setting chassis user permissions. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for details. This command is supported only on hardware platforms that are Virtual Fabric-aware and run Fabric OS v6.2.0 or later. Refer to the Fabric OS Administrator's Guide for specific hardware support. You cannot use the portEnable command on logical ports. Use lfcfg with the --lislenable option to re-enable disabled LISL ports on a logical switch. Operands This command has the following operands: --show -cfg Displays information for the fabric ID set by the context in all chassis reachable from the base fabric. --showall -cfg Displays information for all fabrics in all chassis reachable from the chassis context in which the command is executed. This option requires chassis permissions. --show -lisl Displays status information about the LISLs in the logical switch set by the context. --showall -lisl Displays status information of all LISLs in the chassis. This option requires chassis permissions. -v Displays, in addition to the LISLs, the physical ports on the base switch that are associated with the LISL ports. This operand is optional with the -lisl option. --lislenable Re-enables all LISLs in the fabric that were disabled because of some conflict or error condition in the fabric. This command provides the option of manually re-establishing the LISLs after the error condition has been resolved. --help Displays the command usage. Examples To display logical fabric information for FID 2 in all chassis reachable from the base fabric. switch:admin> lfcfg --show -cfg Chassis: 1 Chassis WWN: 10:00:00:05:1e:39:82:64 Number of Partitions: 2 Base switch domain: 1 Logical switch: 2 State: Online(1) Base switch: YES Fabric Id: 2 Switch WWN: 10:00:00:05:1e:39:81:67 Chassis: 2 Chassis WWN: 10:00:00:05:1e:0b:a4:5e Number of Partitions: 2 Base switch domain: 2 Fabric OS Command Reference 447 53-1001337-01