HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 516
msPlMgmtActivate, Synopsis, Description, Notes, msCapabilityShow, Operands, Examples, See Also
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 516 highlights
2 msPlMgmtActivate msPlMgmtActivate Activates the Management Server (MS) platform service. Synopsis msplmgmtactivate Description Use this command to activate the MS platform service throughout the fabric. This command attempts to activate the MS platform service for each switch in the fabric. The change takes effect immediately and is committed to the configuration database of each affected switch. MS activation is persistent across power cycles and reboots. Notes By default, the MS platform service is disabled. Before issuing this command, run msCapabilityShow to verify that all switches in the fabric support the MS platform service; if one switch does not support the service, the command fails. When an FCS policy is enabled, this command can be issued only from the primary FCS switch. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is supported only in AD0 and AD255 contexts. Operands none Examples To activate the MS platform service: switch:admin> msplmgmtactivate Request to activate MS Platform Service in progress...... *Completed activating MS Platform Service in the fabric! See Also msCapabilityShow, msPlatShow, msPlClearDB, msPlMgmtDeactivate 486 Fabric OS Command Reference 53-1001337-01