HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 576
perfDelFilterMonitor, Synopsis, Description, Notes, Operands, switchShow, perfMonitorShow, Examples
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 576 highlights
2 perfDelFilterMonitor perfDelFilterMonitor Synopsis Deletes one or all filter-based performance monitors from a port. perfdelfiltermonitor [slotnumber/]portnumber [monitorid] Description Use this command to delete a filter-based performance monitor from a port, or all such monitors associated with a port. Notes This command requires an Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. Operands This command has the following operands: slotnumber For bladed systems only, specifies the slot number of the port on which the monitor is to be deleted, followed by a slash (/). portnumber Specifies the number of the port on which the monitor is to be deleted, relative to its slot for bladed systems. Use switchShow for a list of valid ports. monitorid Specifies the numeric key of the monitor to be deleted. The key is defined when a monitor is created and can be displayed with the perfMonitorShow command. This operand is optional. If omitted, this command deletes all filter-based performance monitors associated with the port. Examples To delete filter monitor 4 from a port, and then all filter monitors from the port: switch:admin> perfdelfiltermonitor 2/3 4 The specified filter-based monitor is deleted. switch:admin> perfdelfiltermonitor 2/3 This will remove ALL monitors on port 19, continue? (yes, y, no, n): [no] y See Also perfAddUserMonitor, perfMonitorShow 546 Fabric OS Command Reference 53-1001337-01