HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 720
The port's last State Change Notification., Persistently Disabled
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 720 highlights
2 portShow The following general information is displayed when the command is issued for a non-GbE port without additional arguments: portName Name assigned to the port by the portName command. portHealth Current health of the port (requires a Fabric Watch license). Authentication Authentication type and associated parameters (ifapplicable) used on the port at port online. None No authentication was performed. FCAP FCAP authentication was performed. DHCHAP DHCHAP authentication was performed. Also displays DH group and hash type used for authentication. portDisableReason Provides an explanation for the port's disabled status, if it has not been disabled by portDisable or portCfgPersistentDisable. portCFlags Port control flags. portFlags A bit map of port status flags, including information on the type of port, whether it is fully online, and whether logins have been accepted. portType The port's type and revision numbers. portState The port's SNMP state: Online Up and running. Offline Not online, see portPhys for more detail. Testing Running diagnostics. Faulty Failed diagnostics. Persistently Disabled Persistently disabled. Protocol Protocol used by the port: FC or FCoE. portPhys The port's physical state: No_Card No interface card present. No_Module No module (GBIC or other) present. No_Light Module is not receiving light. Mod_Inv Incompatible vendor or module speed mismatch. No_Sync Receiving light but out of sync. In_Sync Receiving light and in sync. Laser_Flt Module is signaling a laser fault. Port_Flt Port marked faulty. Diag_Flt Port failed diagnostics. Lock_Ref Locking to the reference signal. portScn The port's last State Change Notification. 690 Fabric OS Command Reference 53-1001337-01