HP StorageWorks 4/64 Brocade Fabric OS Command Reference v6.3.0 (53-1001337-01 - Page 679
portDisable, specify multiple
View all HP StorageWorks 4/64 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 679 highlights
portDisable 2 portDisable Synopsis Disables a port or a range of ports. portdisable [slot/]port_number | [slot/]port_range portdisable -i index | index_range Description Use this command to disable a port or a range of ports. If the port is connected to another switch when disabled, the fabric may reconfigure. Devices connected to this port can no longer communicate with the fabric. You can identify the ports to be disabled by port number or by port index. Use switchShow for a listing of valid port and port index numbers. The front panel LED of a disabled port flashes yellow with a two-second cycle. If the port was online before being disabled, a state transition will be indicated in one of the following ways: RSCN, SNMP trap, or Web pop-up window. Notes The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS commands" and Appendix A, "Command Availability" for details. This command is not supported on FCoE ports. To disable an FCoE port, use fcoe --disable. Operands This command has the following operands: slot On bladed systems only, specifies the slot number of the port to be disabled, followed by a slash (/). port | port_range Specifies a single port or a range of ports (port1-port2) to disable, relative to the slot for bladed systems. The port range cannot span slots, but you can specify multiple slot/port_range pairs separated by a space, for example 3/1-4 4/7-9. -i Disables a port or a range of ports identified by port index numbers. index_number| index_range Specifies the index number or a range of index numbers (index1-index2) for the ports to be disabled. Port index ranges are supported only if PortSwap is disabled. Examples To disable a single port: switch:admin> portdisable 2/4 To disable a range of ports: switch:admin> portdisable 2/4-8 To disable multiple port ranges: switch:admin> portdisable 2/24-26 3/10-12 4/3-4 Fabric OS Command Reference 649 53-1001337-01