HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line - Page 132
admin, Description, Authority, Syntax, Operands, Notes, Examples, See also
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 132 highlights
admin Description Opens and closes an Admin session. The Admin session provides access to commands that change the fabric and switch configurations. Only one Admin session can be open on the switch at any time. An inactive Admin session will time out after a specified period of time, which is changed using the set setup system command. Authority User account with Admin authority Syntax admin start or begin end or stop cancel Operands start or begin) Opens the Admin session end or stop Closes the Admin session. The hardreset, hotreset, quit, shutdown, and reset switch commands will also end an Admin session. cancel Terminates an Admin session opened by another user. Use this operand with care because it terminates the Admin session without warning the other user and without saving pending changes. Notes Closing a Telnet window during an Admin session does not release the session. In this case, you must either wait for the Admin session to time out, or use the admin cancel command. Examples The following example shows how to open and close an Admin session: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> . . . 8/20q FC Switch (admin) #> admin end See also set setup system, page 227 132 Command reference