HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line - Page 223
The following is an example of the, command,
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 223 highlights
Examples The following is an example of the set setup services command: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> set setup services A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. PLEASE NOTE Further configuration may be required after enabling a service. * If services are disabled, the connection to the switch may be lost. * When enabling SSL, please verify that the date/time settings on this switch and the workstation from where the SSL connection will be started match, and then a new certificate may need to be created to ensure a secure connection to this switch. TelnetEnabled SSHEnabled GUIMgmtEnabled SSLEnabled EmbeddedGUIEnabled SNMPEnabled NTPEnabled CIMEnabled FTPEnabled MgmtServerEnabled CallHomeEnabled (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) (True / False) [True ] [False] [True ] [False] [True ] [True ] [False] [False] [True ] [True ] [True ] Do you want to save and activate this services setup? (y/n): [n] See also show setup services, page 273 8/20q Fibre Channel Switch Command Line Interface Guide 223