HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line - Page 99
Modifying a group member, Removing members from a group
![]() |
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Modifying a group member Modifying a group member involves changing the member attributes. The member attributes define the authentication method, encryption methods, secrets, and fabric binding, depending on the group type. • For ISL member attributes, see Table 9. • For Port member attributes, see Table 10. • For MS member attributes, see Table 11. To change the attributes of a group member, enter the group edit command, as shown in the following example: 8/20q FC Switch #> admin start 8/20q FC Switch (admin) #> security edit 8/20q FC Switch (admin-security) #> group edit G1 10:00:00:c0:dd:00:90:a3 A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Group Name g1 Group Type ISL Group Member 10:00:00:c0:dd:00:90:a3 Authentication (None / Chap) [None] chap PrimaryHash (MD5 / SHA-1) [MD5 ] sha-1 PrimarySecret (40 hex or 20 ASCII char value) [ ] 12345678901234567890 SecondaryHash (MD5 / SHA-1 / None) [None] md5 SecondarySecret (32 hex or 16 ASCII char value) [ ] 1234567890123456 Binding (domain ID 1-239, 0=None) [3 ] Finished configuring attributes. To discard this configuration use the security cancel command. Removing members from a group To remove a member from a group, enter the group remove command, as shown in the following example: 8/20q FC Switch (admin-security) #> group remove group_1 10:00:00:c0:dd:00:90:a3 8/20q Fibre Channel Switch Command Line Interface Guide 99
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-fibre-channel-switch-command-line-interface-guide-56970313-2010-f4657ae/99.png)