HP StorageWorks 8/20q HP StorageWorks 8/20q Fibre Channel Switch Command Line - Page 232
set setup system logging, hostname, IPv4, or IPv6 Address
View all HP StorageWorks 8/20q manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 232 highlights
The following is an example of the set setup system logging command: 8/20q FC Switch (admin) #> set setup system logging A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: LocalLogEnabled RemoteLogEnabled RemoteLogHostAddress True False 10.0.0.254 New Value (press ENTER to accept current value, 'q' to quit, 'n' for none): LocalLogEnabled (True / False) : RemoteLogEnabled (True / False) : RemoteLogHostAddress (hostname, IPv4, or IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] The following is an example of the set setup system ntp command: 8/20q FC Switch (admin) #> set setup system ntp A list of attributes with formatting and current values will follow. Enter a new value or simply press the ENTER key to accept the current value. If you wish to terminate this process before reaching the end of the list press 'q' or 'Q' and the ENTER key to do so. Current Values: NTPClientEnabled NTPServerDiscovery NTPServerAddress False Static 10.20.10.10 New Value (press ENTER to accept current value, 'q' to quit, 'n' for none): NTPClientEnabled (True / False) : NTPServerDiscovery (1=Static, 2=Dhcp, 3=Dhcpv6) : NTPServerAddress (hostname, IPv4, or IPv6 Address) : Do you want to save and activate this system setup? (y/n): [n] 232 Command reference