HP StorageWorks MSA 2/8 HP StorageWorks Fabric OS Procedures V3.1.x/4.1.x User - Page 81
password can be NULL, is the path location and filename of the new firmware
View all HP StorageWorks MSA 2/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 81 highlights
Firmware Download This message will vary, depending on the operating system you are currently running. Note, in this example the Active CP is CP1, and the Standby CP is CP0. 5. Enter the ipaddrshow command to determine the IP address of the Active CP. Example switch:admin> ipaddrshow Switch number [0 for switch0, 1 for switch1, 2 for CP0, 3 for CP1, 4 for all IP addresses in system]: 3 CP1 Ethernet IP Address: 192.168.186.196 Ethernet Subnetmask: 255.255.255.0 HostName : cp1 Gateway Address: 192.168.186.1 switch:admin> 6. Log in to the Active CP as the admin user. 7. Enter the following at the command line (double-quotes are optional in 4.x firmware): firmwaredownload "hostIPaddr", "user", "path_filename", "password" - hostIPaddr is the IP address of the host computer. - user is the User ID used to log in to this computer. - path_filename is the path location and filename of the new firmware file. - password is the password for the user ID specified. (Note: the password can be NULL) or Enter the firmwaredownload command to be prompted for parameters. 8. Enter Y for yes to continue with the reboot, when prompted. The firmware is downloaded onto both CPs, one at a time. During the process, the active CP is rebooted and existing services may be disrupted momentarily. Fabric OS Procedures Version 3.1.x/4.1.x User Guide 81