HP StorageWorks SB40c HP StorageWorks SB40c Storage Blade User Guide (433904-0 - Page 12
Installing a storage blade
View all HP StorageWorks SB40c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
• Install the coupler plate on the SB40c. • Install the SB40c in any device bay on the lower row of the enclosure (9 through 16). • If the SB40c is installed in an odd-numbered bay, install the partner server blade in the adjacent even-numbered bay to the right. • If the SB40c is installed in an even-numbered bay, install the partner server blade in the adjacent odd-numbered bay to the left. • When installing the SB40c with a full-height server blade, a half-height server blade can be installed in the empty bay above the SB40c. This server blade cannot be partnered with the SB40c. Installing a storage blade CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the enclosure unless all hard drive and device bays are populated with either a component or a blank. 1. Install the hard drives ("Hard drive options" on page 16). 2. Remove the blank. Setup 12