HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 13

Event messages, Alarm events, Table 4 Alarm events and recommended action

Get HP StorageWorks SN6000 - Fibre Channel Switch PDF manuals and user guides View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

2 Event messages This section contains descriptions of the event messages from the switch, Simple SAN Connection Manager, and QuickTools in message ID sequence by the following severity levels: • Alarm events, page 13 • Critical events, page 38 • Warning events, page 46 • Informative events, page 49 NOTE: You can look for a message by its message ID or by searching for the message text. If the message you are looking up does not appear in this section, contact your authorized maintenance provider. Alarm events Alarm events require action before you can proceed any further. Table 4 shows the icon for alarm events and the Event ID number and message displayed, and provides a description of the meaning of the message and recommended action to take. Table 4 Alarm events and recommended action Icon Event ID and message Description Action (A1000.000F) (The switch is canceling the hotreset - try again later) You cannot move forward with the hot reset. All applications and switch resources are backing out of the procedure and returning to normal operation. Ensure that the fabric is stable and that no changes are being made to switch configurations or connections and then try again. (A1000.001D) (Hotreset failed and the switch must be reset normally) The hot reset has failed and left the switch in an indeterminate state. Reset the switch. (A1000.001E) (Hotreset failed and the switch is being reset) There was a failure during the None hotreset process; the switch is being reset normally. (A1003.000B) (Failing release of fabric lock held by switch with domain domain_ID) The local switch is locked because zoning changes are being made by a remote switch. Wait for the lock to time out and try again. (A1003.000C) (Fabric Busy, failing lock request from domain domain_ID) The command failed because the fabric is busy with another command in progress. Wait10 seconds and retry the command. (A1003.000D) (Fabric already locked by domain domain_ID) The switch given by the domain_ID has locked the fabric. Unlock the domain_ID lock on the switch given by domain_ID. (A1003.000E) (Couldn't acquire lock from domain domain_ID) The fabric may be changing, Wait for the fabric to and therefore could not stabilize, then try again. acquire the lock. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide
13
2
Event messages
This section contains descriptions of the event messages from the switch, Simple SAN Connection
Manager, and QuickTools in message ID sequence by the following severity levels:
•
Alarm events
, page 13
•
Critical events
, page 38
•
Warning events
, page 46
•
Informative events
, page 49
NOTE:
You can look for a message by its message ID or by searching for the message text. If the
message you are looking up does not appear in this section, contact your authorized maintenance
provider.
Alarm events
Alarm events require action before you can proceed any further.
Table 4
shows the icon for alarm events
and the Event ID number and message displayed, and provides a description of the meaning of the
message and recommended action to take.
Table 4
Alarm events and recommended action
Icon
Event ID and message
Description
Action
(A1000.000F) (The
switch is canceling the
hotreset - try again
later)
You cannot move forward
with the hot reset. All
applications and switch
resources are backing out of
the procedure and returning
to normal operation.
Ensure that the fabric is stable
and that no changes are
being made to switch
configurations or connections
and then try again.
(A1000.001D) (Hotreset
failed and the switch
must be reset normally)
The hot reset has failed and
left the switch in an
indeterminate state.
Reset the switch.
(A1000.001E) (Hotreset
failed and the switch
is being reset)
There was a failure during the
hotreset process; the switch is
being reset normally.
None
(A1003.000B) (Failing
release of fabric lock
held by switch with
domain
domain_ID
)
The local switch is locked
because zoning changes are
being made by a remote
switch.
Wait for the lock to time out
and try again.
(A1003.000C) (Fabric
Busy, failing lock
request from domain
domain_ID
)
The command failed because
the fabric is busy with
another command in
progress.
Wait10 seconds and retry the
command.
(A1003.000D) (Fabric
already locked by
domain
domain_ID
)
The switch given by the
domain_ID
has locked the
fabric.
Unlock the domain_ID lock
on the switch given by
domain_ID
.
(A1003.000E) (Couldn't
acquire lock from
domain
domain_ID
)
The fabric may be changing,
and therefore could not
acquire the lock.
Wait for the fabric to
stabilize, then try again.