HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 35

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1007.002E) (Ignoring RADIUS Server RADIUS_server, zero timeout configured) A Remote Authentication Dial In User Service (RADIUS) server was configured with invalid data for the timeout value. To use the RADIUS server, a timeout value is required. Set the timeout value in the switch RADIUS server configuration using the set setup radius command. (A1007.002F) (Ignoring RADIUS Server RADIUS_server, no shared secret is configured) A Remote Authentication Dial In User Service (RADIUS) server was configured with invalid data for the shared secret. To use the RADIUS server, a shared secret is required. Set the shared secret in the switch RADIUS server configuration using the set setup radius command. (A1007.0030) (Security protocol not using chap, unable to authenticate.) A Challenge Handshake Authentication Protocol (CHAP) negotiate frame was received that specifies an unsupported Diffie-Helmann (DH) Group type. Check the remote device for a possible error condition. Reset the port and retry. If errors continue, disable CHAP for this device if the device belongs in the fabric. (A1007.0031) (Security protocol not using chap, unable to authenticate.) A Challenge Handshake Authentication Protocol (CHAP) negotiate frame was received that specified an unsupported hashing algorithm or an algorithm that is not allowed for this security member's configuration. Check the remote device for a possible error condition. Reset the port and retry. If errors continue, disable CHAP for this device if the device belongs in the fabric. (A1007.0032) (Fabric conditions or configurations do not currently allow for changing fabric binding.) An attempt to change the fabric binding setting was rejected due to current fabric binding configuration settings within the active security set. Check fabric binding settings and the domain IDs of the switches within the fabric. Add missing switches to the ISL group of the active security set. (A1007.0033) (Device device_WWN failed port binding.) A device attempted a fabric login, but that device was not configured in the port binding list for the specified port. Add the device to the port binding list. (A1007.0034) (Device device_wwn failed switch binding.) A device attempted a fabric login, but that device was not configured in the switch binding list for the specified switch. Add the device to the switch binding list. (A1007.0035) (Port taken offline due to switch binding failure following configuration change.) A configuration change was made to the switch binding list such that the device(s) on the port were no longer allowed to be logged in. Add the devices to the switch binding list. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 35