HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 15

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1003.0021) (Failing remote zoning configuration, Zoneset is empty) An empty zone set was included as part of a zone merge and was rejected. Modify the zoning database on the remote switch to remove or correct the empty zone set. (A1003.0022) (Unable to update database with newly activated information, Zoning Save in Progress) Modifications were being made to the security or zoning database while a security set or zone set was being activated or deactivated from a remote switch. Try the activation or deactivation again later. (A1003.0023) (Fabric Busy Zoneset operation failed) The activation or deactivation Try the activation or of a zone set failed because deactivation again later. the fabric is currently busy. (A1003.0024) (Request already in progress (internal lock held)) A fabric operation is currently Wait and try again. in progress. (A1003.0025) (Error reading security set.) There was a problem handling the activate direct management server command. The format of the command was not standard. Check the security configuration. (A1003.0028) (SFC failure received from remote switch with domain domain_ID) The remote switch given by domain_ID rejected the Staged Fabric Configuration (SFC) message, so the SFC request has failed. Check the status of the remote switch at the given domain ID. There could be an issue with the security configuration or the zoning configuration. (A1003.0029) (No response received from switch with domain ID domain_ID) The remote switch given by domain_ID did not reply to an Acquire Change Authorization (ACA) message, so the ACA request has failed. Check the status of the remote switch at the given domain ID. There could be an issue with the security configuration or the zoning configuration. (A1003.002A) (No response received from switch with domain ID domain_ID) A Storage Fabric Configuration (SFC) frame was sent to the switch given by domain_ID, but a response was not received. Check the status of the remote switch at the given domain ID. There could be an issue with the security configuration or the zoning configuration. (A1003.002B) (No response received from switch with domain ID domain_ID) An Update Fabric Configuration (UFC) frame was sent to the switch given by domain_ID, but a response was not received. Check the status of the switch. (A1003.002C) (Zone Merge response indicates failure due to zoning limits, Isolating link) Response from other switch indicates that the active zone sets could not be merged. Edit or delete the conflicting zone objects or deactivate the zone set on the remote switch. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 15