HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 44

Table 5 Critical event messages and descriptions (Continued) Icon Event ID and message Description (C) (8B00.0005) (Unable to test The test of the named profile failed because profile profile because the CallHome the Call Home service is disabled. service is disabled) (C) (8B00.0006) (Unable to test profile because the CallHome service is disabled) The test of the named profile failed because the Simple Mail Transfer Protocol (SMTP) server IP addresses are the factory defaults or the servers are disabled in the Call Home service configuration. (C) (8B00.0007) (Unable to test profile profile because the FromEmailAddress has not been configured in the CallHome setup) The test of the named profile failed because the FromEmailAddress parameter was not specified in the Call Home service configuration. (C) (8B00.0008) (Unable to test profile profile because the CallHome service is updating configuration) The profile cannot be tested while the Call Home service configuration is being updated. (C) (8B00.0009) (Unable to send test The pass or fail notification for the test could result for profile profile) not be sent to the requestor. (C) (8B00.000A) (Unable to provide profile processing information, the CallHome service is updating configuration) Profile status information is not available while the Call Home service configuration is being updated. (C) (8B00.000B) (Unable to change SMTP servers because the CallHome service is updating configuration) You cannot change the active Simple Mail Transfer Protocol (SMTP) server while updating the Call Home service configuration. (C) (8B00.000C) (FromEmailAddress has not been configured in the CallHome setup. Messages cannot be sent to the SMTP server until this condition is corrected.) The FromEmailAddress parameter must be specified in the Call Home service configuration. This e-mail address will receive notifications from the Simple Mail Transfer Protocol (SMTP) servers concerning e-mail messages that could not be delivered. (C) (8B00.0012) (Critical protocol failure with SMTP server) Communications have failed, or an unrecoverable Simple Mail Transfer Protocol (SMTP) error has occurred on the active SMTP server. (C) (8B00.0014) (Successful recovery of SMTP communications) Communications have been re-established with one of the Simple Mail Transfer Protocol (SMTP) servers following a communications failure. (C) (8B00.0016) (SMTP server ip_address, port port_number, did not accept any recipients from profile profile. Email message will not be sent for this profile.) The Simple Mail Transfer Protocol (SMTP) server does not recognize or could not resolve any of the recipient e-mail addresses listed for the profile. (C) (8F00.000C) Fabric Status status The severity level of the fabric status has changed. The description field will show the reason for the fabric status. 44