HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 25
G_Port or F_Port., Diagnostics to any other
![]() |
View all HP StorageWorks SN6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1005.000C) (Configuration error, insufficient credit in pool. Extended credit not granted for port port_number) Insufficient credits were Decrease the number of available in the credit pool to requested credits or add grant the credit request. more donor ports. (A1005.000D) (Configuration error, insufficient credit in pool. Extended credit not granted for port port_number) Insufficient credits were Decrease the number of available in the credit pool to requested credits or add grant the credit request. more donor ports. (A1005.000E) (Configuration error, can't extend credit on loop capable ports. Extended credit not granted for port: port_number) Loop ports cannot borrow credits from the credit pool. Change the port type to G_Port or F_Port. (A1005.0020) (Warning development logging is enabled) Development logging is enabled. Contact your authorized maintenance provider. (A1005.0024) (Switch must be reset after leaving the Diagnostics Admin State) After changing the switch administrative state from Diagnostics to any other state, the switch must be reset to complete the state change. Reset the switch. (A1005.0034) (System resource error contact technical support) There is a system resources problem on the switch. Contact technical support. (A1005.0035) (System resource error contact technical support) There is an internal problem Contact technical support. on the switch. (A1005.0038) (Switch incompatibility error contact technical support) Switch incompatibility error. Contact technical support. (A1005.0039) (Fabric Login (FLOGI) from address FC_address failed) The payload of the fabric login (FLOGI) command was not valid. Check the device connection or replace the device. If the problem persists, contact your authorized maintenance provider. (A1005.003A) (Fabric Login (FLOGI) from address FC_address failed authorization/authentic ation) Security authentication failed. Check the security configuration on both the device and the switch to ensure that they are configured properly. HP StorageWorks 8/20q and SN6000 Fibre Channel Switch Event Message Reference Guide 25
![](/manual_guide/products/hewlettpackard-ak241a-hp-storageworks-820q-sn6000-fibre-channel-switch-event-message-reference-guide-56970264-2010-d1b79f3/25.png)