HP StorageWorks SN6000 HP StorageWorks 8/20q and SN6000 Fibre Channel Switch e - Page 14

Table 4 Alarm events and recommended action (Continued) Icon Event ID and message Description Action (A1003.0014) (Segmenting, alias alias_name merge conflict) There is a conflict in the zoning configuration, causing the Fabric inter-switch link (ISL) to isolate. Two aliases were discovered with the same name, but different membership in the local zoning database. Reconcile the active zone sets so that the two aliases have identical membership. (A1003.0015) (Zoneset Activation received from switch with domain domain_ID failed, unknown zoneset zone_set_name) A zone set activation received from the named switch failed because the zone set was not in the zoning database. Examine the named switch to verify that the zoning database is correct. (A1003.0016) (Releasing Lock held too long by domain_ID) A zone merge could not be completed in the acceptable time. Check the status of the switch given by domain_ID. (A1003.0017) (Activation of zoneset by management server failed due to port port_number out of range.) A zone member defined by domain ID and port was received within a management server azsd (Activate Zoneset Direct) command with a port number out of range. Check the management server application zoning configuration to make sure that zone members are properly configured. (A1003.001B) (Failing remote zoning configuration, total zoneset limit would be exceeded) The maximum number of zone sets allowed on the switch has been exceeded due to a zone merge. Reduce the number of zone sets on the remote switch. (A1003.001C) (Failing remote zoning configuration, total member limit would be exceeded) The maximum number of zone members allowed on the switch has been exceeded due to a zone merge. Reduce the number of zone members on the remote switch. (A1003.001D) (Failing remote zoning configuration, total zones in zonesets limit would be exceeded) The maximum number of zones allowed in zone sets on a switch has been exceeded due to a zone merge. Reduce the number of zones on the remote switch. (A1003.001F) (Failing remote zoning configuration, member limit for zone zone_name exceeded, (size= number_of_zones, limit= maximum_number_of_zones )) The maximum number of members allowed for the given zone has been exceeded due to a zone merge. Reduce the number of members in the given zone on the remote switch. (A1003.0020) (Failing remote zoning configuration, total zone limit would be exceeded) The maximum number of zones allowed on the switch has been exceeded due to a zone merge. Reduce the number of zones on the remote switch. 14