HP StoreEver LTO-4 Ultrium SB1760c HP StorageWorks Tape Blade User Guide (6250 - Page 17
Drivers and backup software, Install drivers, SAS controller driver
View all HP StoreEver LTO-4 Ultrium SB1760c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
2 Drivers and backup software In this chapter: • "Install drivers " on page 17 • "Upgrade backup software" on page 19 Install drivers Two drivers are required: • A SAS controller driver for the Tape Blade assembly • An HP Ultrium Tape driver for the tape drive IMPORTANT: The SAS controller driver must be installed first. SAS controller driver The SAS controller driver is only available from the HP website and must be installed before the HP Ultrium Tape driver. It can be installed from the link on the HP StorageWorks Tape CD-ROM or directly from the HP Support website, http://www.hp.com/#Support. Different tape blade models may require different controller drivers. To identify the correct SAS controller for your product: You can identify the tape blade's SAS controller from the POST message (slot x ) or from Windows Device Manager. The Tape Blade appears under the Storage Controller section of Device Manager. In the following example, the Tape Blade has a Smart Array P212 controller. Tape Blade 17