HP Stream 11-aa000 Maintenance and Service Guide - Page 43
Solid-state drive and hardware, Remove the Phillips M2.0×3.0 screw
View all HP Stream 11-aa000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Solid-state drive and hardware Description 128-GB, SATA-3, TLC 128-GB, SATA-3 Solid-state drive hardware kit (includes bracket, cable, Mylar, and screws) Solid-state drive board Spare part number L17297-001 918858-001 918701-001 918702-001 Before removing the solid-state drive, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 30). Remove the solid-state drive: 1. Remove the Phillips M2.0×3.0 screw (1), and then pull the solid-state drive module from the socket (2). 2. If you need to remove solid-state drive board, lift the system board ZIF connector (1) and disconnect the cable (2). Component replacement procedures 35