HP Stream 11-aa000 Maintenance and Service Guide - Page 65
Display assembly
View all HP Stream 11-aa000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Display assembly NOTE: The display assembly is spared at the subcomponent level only. For more display assembly spare part information, see the individual removal subsections. Before removing the display assembly, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 30). Remove the display assembly: 1. Remove the two Phillips PM2.5×6.3 screws (1) that secure the display right hinge to the keyboard/ top cover. 2. Remove the Phillips PM2.5×4.3 screw (2) that secures the display right hinge to the keyboard/top cover. 3. Swing the display right hinge up and back as far as it will go (3). 4. Remove the four Phillips PM2.5×6.3 screws (1) that secure the display left hinge to the keyboard/ top cover. Component replacement procedures 57