HP Stream 11-aa000 Maintenance and Service Guide - Page 48
Power connector cable, top cover.
View all HP Stream 11-aa000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Power connector cable Description Power connector cable Spare part number 913730-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Disconnect the battery cable from the system board (see Battery on page 30). Remove the power connector cable: 1. Remove the two Phillips PM2.5×6.3 screws (1) that secure the display right hinge to the keyboard/ top cover. 2. Remove the Phillips PM2.5×4.3 screw (2) that secures the display right hinge to the keyboard/top cover. 3. Swing the display right hinge (3) up and back until the power connector is accessible. 4. Disconnect the power connector cable (1) from the system board. 40 Chapter 5 Removal and replacement procedures