HP Stream 11-aa000 Maintenance and Service Guide - Page 61
TouchPad, the TouchPad cable from the system board.
View all HP Stream 11-aa000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
TouchPad NOTE: The TouchPad spare part kit includes the TouchPad bracket. NOTE: The TouchPad spare part kit does not include the TouchPad cable. Refer to TouchPad cable on page 52 for TouchPad cable removal instructions. The TouchPad cable is available using spare part number 906781-001. Description TouchPad in aqua blue finish TouchPad in jet black finish TouchPad in snow white finish TouchPad in violet purple finish TouchPad in infinity purple finish Spare part number 911119-001 911118-001 912835-001 906786-001 L21648-001 Before removing the TouchPad, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the bottom cover (see Bottom cover on page 28). 5. Remove the battery (see Battery on page 30). Remove the TouchPad: 1. Release the ZIF connector (1) to which the TouchPad cable is attached, and then disconnect the TouchPad cable from the system board. 2. Remove the three Phillips PM2.0×2.3 screws (2) that secure the TouchPad to the keyboard/top cover. 3. Remove the six Phillips PM2.0×3.3 screws (3) that secure the TouchPad and the TouchPad bracket to the keyboard/top cover. 4. Remove the TouchPad bracket (4). Component replacement procedures 53