HP Stream 13-c000 Maintenance and Service Guide - Page 44
Power button board, that secures the power button board to the keyboard
View all HP Stream 13-c000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Power button board Description Power button board (includes cable) Spare part number 792777-001 Before removing the power button board, follow these steps: 1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect the power from the computer by unplugging the power cord from the computer. 3. Disconnect all external devices from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 29). Remove the power button board: 1. Position the keyboard/top cover upside down. 2. Remove the PM2.0×2.0 broad head screw (1) that secures the power button board to the keyboard/ top cover. 3. Lift the board to disengage it from the posts built into the top cover (2) and then remove the board (3). Reverse this procedure to install the power button board. 36 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts