HP Stream 13-c000 Maintenance and Service Guide - Page 69

Power connector cable, unplugging the AC adapter from the computer.

Get HP Stream 13-c000 PDF manuals and user guides View all HP Stream 13-c000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 69 highlights

c. Release the antenna cables from the retention clips (2) and channel built into the top edge and right side of the display back cover. The antenna cables and transceivers are included in the WLAN Antenna Kit, spare part number 792758-001 and WWAN Antenna Kit, spare part number 792757-001. Reverse this procedure to reassemble and install the display assembly. Power connector cable Description Power connector cable (includes tape) Spare part number 796086-001 Before removing the power connector cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer. 4. Remove the keyboard/top cover (see Keyboard/top cover on page 29). 5. Disconnect the battery cable from the system board (see Battery on page 41). 6. Remove the display assembly (see Display assembly - non-touch screen models on page 48) or Display assembly - touch screen models on page 56. Remove the power connector cable: Component replacement procedures 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
c.
Release the antenna cables from the retention clips
(2)
and channel built into the top edge and
right side of the display back cover.
The antenna cables and transceivers are included in the WLAN Antenna Kit, spare part number
792758-001 and WWAN Antenna Kit, spare part number 792757-001.
Reverse this procedure to reassemble and install the display assembly.
Power connector cable
Description
Spare part number
Power connector cable (includes tape)
796086-001
Before removing the power connector cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is
off
or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by
first
unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover
on page
29
).
5.
Disconnect the battery cable from the system board (see
Battery
on page
41
).
6.
Remove the display assembly (see
Display assembly – non-touch screen models
on page
48
) or
Display
assembly – touch screen models
on page
56
.
Remove the power connector cable:
Component replacement procedures
61