HP Surestore Tape Library Model 6/100 Hardware Operator's Guide - Page 34
Power Switch
![]() |
View all HP Surestore Tape Library Model 6/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Hardware Operator's Guide Power Switch The power switch is an ON/OFF switch located in the bottom of the rear cover of the LSM, as shown in Figure 2-5. Press the switch to the ON position to supply power to the robot and the drives. Make sure that all jobs being performed by the robot and the drives are complete, then press the switch to the OFF position to remove power from the robot and the drives. Figure 2-5. Power Switch Location 2-8
![](/manual_guide/products/hewlettpackard-surestore-tape-library-model-6100-hardware-operator039s-guide-236b769/34.png)
Hardware Operator’s Guide
2–8
Power Switch
The power switch is an ON/OFF switch located in the bottom of the rear cover of
the LSM, as shown in
Figure 2–5. Press the switch to the ON position to supply
power to the robot and the drives. Make sure that all jobs being performed by the
robot and the drives are complete, then press the switch to the OFF position to
remove power from the robot and the drives.
Figure 2–5.
Power Switch Location