HP Surestore Tape Library Model 6/100 Hardware Operator's Guide - Page 54
Setting Write Protect Switch
View all HP Surestore Tape Library Model 6/100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Hardware Operator's Guide Setting Write Protect Switch Refer to Figure 4-3 to see the location of the write protect switch. To set the cartridge to write protected, slide the switch to the left so the orange indicator is visible. In this position, the drive can only read data from the tape and cannot write data to the tape. To set the cartridge to write enabled, slide the switch to the right so the orange indicator is not visible. In this position, the drive can write as well as read data. Figure 4-3. Setting the Write Protect Switch 4-4
Hardware Operator’s Guide
4–4
Setting Write Protect Switch
Refer to Figure 4–3 to see the location of the write protect switch.
To set the
cartridge to
write protected
, slide the switch to the left so the orange indicator is
visible.
In this position, the drive can only read data from the tape and cannot write
data to the tape.
To set the cartridge to
write enabled
, slide the switch to the right so the orange
indicator is not visible.
In this position, the drive can write as well as read data.
Figure 4–3.
Setting the Write Protect Switch