HP Tango User Guide - Page 61
Tips for working with cartridges, printer software shows one or both cartridges in a low state
View all HP Tango manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Tips for working with cartridges Use the following tips to work with cartridges: ● To protect the cartridges from drying out, always turn the printer off using the Power button. ● Do not open or untape cartridges until you are ready to install them. Leaving tape on the cartridges reduces ink evaporation. ● Insert the cartridges into the correct slots. Match the color of each cartridge to the color of the cartridge latch. Make sure the cartridges snap into place. ● Align the printer for best print quality. See Printing issues for more information. ● When the Estimated Cartridge Levels screen in the HP Smart app or the Estimated Levels screen in the printer software shows one or both cartridges in a low state, consider getting replacement cartridges to avoid possible printing delays. You do not need to replace the cartridges until print quality becomes unacceptable. See Replace cartridges for more information. ● If you remove a cartridge from the printer for any reason, try to replace it again as soon as possible. If a cartridge is left unprotected outside the printer, its nozzles might dry out and clog up. ENWW Tips for working with cartridges 57