HP Tc4100 Hewlett-Packard VA 7100/7400 Microsoft Cluster Services Installation - Page 34

Node 1 (Primary Node) Configuration, Introduction, Preliminary Operations, Configuration Procedure

Get HP Tc4100 - Server - 256 MB RAM PDF manuals and user guides View all HP Tc4100 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

VA 7100/7400 Cluster Installation Guide 5 Node 1 (Primary Node) Configuration Introduction This chapter contains the step-by-step procedure for configuration of node 1, the primary node, of the VA 7100/7400 disk array in a dual-path cluster configuration. Preliminary Operations The following preliminary operations must be successfully completed before beginning the node 1 configuration procedure. 1. Ensure that all requirements detailed in chapters 2 through 4 have been thoroughly reviewed and successfully completed. 2. Ensure that configuration of the internal and external arrays has been completed. Configuration Procedure To configure node 1 of the cluster, proceed as follows: 1. Reboot node 1. 2. Configuration screen of the dedicated Ethernet interconnect (crossover or heartbeat) NIC for node 1 is shown below. Enter only the IP address and Subnet mask values. For node 1 TCP/IP values, set IP address to 10.0.0.1 and Subnet mask to 255.0.0.0. Leave all other fields empty. 10/12/01 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
VA 7100/7400 Cluster Installation Guide
10/12/01
31
5
Node 1 (Primary Node) Configuration
Introduction
This chapter contains the step-by-step procedure for configuration of node 1, the primary node, of the VA 7100/7400
disk array in a dual-path cluster configuration.
Preliminary Operations
The following preliminary operations must be successfully completed before beginning the node 1 configuration
procedure.
1.
Ensure that all requirements detailed in chapters 2 through 4 have been thoroughly reviewed and successfully
completed.
2.
Ensure that configuration of the internal and external arrays has been completed.
Configuration Procedure
To configure node 1 of the cluster, proceed as follows:
1. Reboot node 1.
2.
Configuration screen of the dedicated Ethernet interconnect (crossover or heartbeat) NIC for node 1 is shown
below.
Enter only the IP address and Subnet mask values.
For node 1 TCP/IP values, set IP address to
10.0.0.1
and Subnet mask to
255.0.0.0
.
Leave all other fields empty.