HP Tc4100 Hewlett-Packard VA 7100/7400 Microsoft Cluster Services Installation - Page 9
Virtual Array Setup and Configuration Procedure, Command View SDM Software Installation
![]() |
View all HP Tc4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
VA 7100/7400 Cluster Installation Guide Virtual Array Setup and Configuration Procedure To perform the virtual array setup and configuration process, proceed as follows: Command View SDM Software Installation 1. Connect a null modem cable to one of the controllers in the VA. As shown below, the settings are as follows: o Bits per second: 9600 o Data bits: 8 o Parity: None o Stop bits: 1 o Flow control: None Then, click OK. 10/12/01 6
![](/manual_guide/products/hewlettpackard-lh3000r-hewlettpackard-va-71007400-microsoft-cluster-services-installation-guide-hp-netservers-636f2c5/9.png)
VA 7100/7400 Cluster Installation Guide
10/12/01
6
Virtual Array Setup and Configuration Procedure
To perform the virtual array setup and configuration process, proceed as follows:
Command View SDM Software Installation
1.
Connect a null modem cable to one of the controllers in the VA.
As shown below, the settings are as follows:
o
Bits per second:
9600
o
Data bits:
8
o
Parity:
None
o
Stop bits:
1
o
Flow control:
None
Then, click
OK
.