HP Tc4200 Hardware-Software Guide - Page 134
Primary Memory Module Slot - can power switch be replaced
View all HP Tc4200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 134 highlights
Memory Modules Primary Memory Module Slot To replace the existing memory module in the primary memory module slot: 1. Shut down the tablet PC. (If you are not sure whether the tablet PC is off or in hibernation, turn on the tablet PC by sliding the power switch toward the front of the tablet PC. Then shut down the tablet PC through the operating system.) 2. Disconnect all external devices connected to the tablet PC. 3. Disconnect the power cord. 4. Turn the tablet PC upside down. 5. Remove any battery packs from the tablet PC. 6. Remove 11 screws from the bottom of the tablet PC: the four T8M2.0x18.0 screws 1, the six T8M2.0x9.0 screws 2, and one T8M2.0x5.0 screw 3. Ä The screws in the bottom of the tablet PC are of different lengths. To protect the tablet PC, be sure to keep track of the screws by size and location for safe replacement. Hardware and Software Guide 9-6