HP TouchSmart IQ506t Upgrade and Service Guide - Page 16

Removing and Installing the Hard Disk Drive, Removing the hard disk drive

Page 16 highlights

Removing and Installing the Hard Disk Drive You can replace or upgrade the hard disk drive. The hard disk drive is a Serial ATA (advanced technology attachment) drive, which uses a narrow data cable. CAUTION: Before removing the hard disk drive, back up any personal files on the hard disk drive to an external storage device, such as a DVD. Failure to do so may result in data loss. After replacing the hard disk drive, you need to run System Recovery using recovery discs to load the factory-installed files. For details about the recovery procedure, refer to the Limited Warranty, Support, and System Recovery Guide included with your HP TouchSmart PC. Removing the hard disk drive 1 Complete the procedures to prepare the HP TouchSmart PC. See "Opening the HP TouchSmart PC" on page 3. WARNING: To reduce the risk of personal injury from electrical shock or hot surfaces, disconnect the power cord from the wall outlet, and allow the internal system components to cool before touching them. 2 Remove the computer stand by removing the four screws that secure it to the back of the computer. 12 Upgrading and Servicing Guide

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

12
Upgrading and Servicing Guide
Removing and Installing the Hard Disk Drive
You can replace or upgrade the hard disk drive.
The hard disk drive is a Serial ATA (advanced technology attachment) drive, which uses a narrow
data cable.
Removing the hard disk drive
1
Complete the procedures to prepare the HP TouchSmart PC. See “Opening the HP TouchSmart PC” on
page 3.
2
Remove the computer stand by removing the four screws that secure it to the back of the computer.
CAUTION: Before removing the hard disk drive, back up any personal files on the hard disk
drive to an external storage device, such as a DVD. Failure to do so may result in data loss.
After replacing the hard disk drive, you need to run System Recovery using recovery discs
to load the factory-installed files. For details about the recovery procedure, refer to the
Limited Warranty, Support, and System Recovery Guide
included with your HP TouchSmart PC.
WARNING: To reduce the risk of personal injury from electrical shock or hot surfaces,
disconnect the power cord from the wall outlet, and allow the internal system components to
cool before touching them.